Def Handling Equipment

Diaphragm transfer pump designed for dispensing DEF / Adblue

Lightweight non corroding, weather proof polypropylene body

Self priming pump design

Built-In Thermal Overload Protection

Duty Cycle

30 minutes ON / 30 minutes OFF

Pump inlet and outlet fitted with 3/4" (19 mm) hose barbs

WETTED COMPONENTS

Polypropylene, EPDM, Viton

RECOMMENDED USE

DEF/Adblue, Urea, Water, Antifreeze, Antifreeze, Detergents etc.

DO NOT USE WITH

Diesel, Kerosene, Gasoline, Oils etc.

SPECIFICATIONS 

 ORDERING INFORMATION

DEF-Diesel Exhaust Fluid is a mixture of high purity synthetic automotive grade urea and de-ionised water. It is used in SCR (Selective Catalytic Reduction) system on diesel engines to reduce emissions Designed to transfer DEF from a Drum/ Tote to smaller container/engines etc.

A  DEF transfer system consists of

a. DEF Transfer Pump

220V AC Diaphragm pump with lightweight non-corroding polypropylene body

b. DEF Digital Meter

Battery operated digital meter for use with DEF and water based media. Polyamide body and sealed electronic card makes it suitable for use in all sorts of weather conditions

Measures in Litres, Quarts, Pints and Gallons 

c. Inlet Hose

Special EPDM inlet hose connecting the Drum/Tote opening to the pump inlet respectively 

d. Suction Hose

Special EPDM suction hose  

e. Discharge Hose

20' special EPDM hose connecting the pump meter outlet to the dispensing nozzle

f. Connecting adaptor  

g. Manual DEF Nozzle

Nylon construction with SS hardware and Viton seals, Manual control, but also includes a continuous flow switch for unattended dispensing

h. Auto Shut Off DEF Nozzle

Sensor built into the discharge spout automatically shuts off the supply once fluid level in the Drum/Tote reaches that of the outlet discharge spout

i. Nozzle Holder

For safe storage of the nozzle while the fluid is not being dispensed

j. Mounting Plate

Stainless Steel mounting plate for use in 1000/1200 litres (275/330 gallons) totes and 205 litre (55 gallon) drums

Drum mounting plate is stretchable for varying drum dia and acts as base for installing pump and other accessories 

IBC KIT PART LIST 

SPECIFICATIONS 

 ORDERING INFORMATION

Digital turbine meter with polyamide construction, designed especially for use with DEF, water etc

Designed for in-line, end of the line application or use with a dispensing nozzle

Polyamide turbine measuring mechanism

Electronic display using two AAA 1.5V batteries

Polyamide body and sealed electronic card makes it suitable for use in severe weather conditions

Display can be rotated in 4 different positions

Measures in litres, quarts, pints and gallons Easy user re-calibration

Includes one additional stainless steel adaptor to convert from 1" male to 1" female threads 

WETTED COMPONENTS

Polyamide, Viton, Stainless Steel

RECOMMENDED USE

Urea, Adblue, DEF, Windshield Fluids, Water and Water Based Media 

DO NOT USE WITH

Fuels and Oils 

SPECIFICATIONS 

 ORDERING INFORMATION

For use with DEF, adblue, urea, windshield fluids and other water based media

Nylon construction with stainless steel internal parts and viton seal

Nozzle spout with notches to avoid the gun from slipping from the tank during delivery

Hose barb 3/4" (20 mm) at inlet

Manual control. Also includes continuous flow switch for unattended dispensing

Designed for minimal back pressure and reduction in flow

WETTED COMPONENTS

Nylon (Nylon 6, 30% glass Filled), Stainless Steel, Viton

RECOMMENDED USE

Diesel Exhaust Fluid, Adblue and Urea 

ORDERING INFORMATION

For use with DEF, Adblue, Urea, Windshield fluids and Other based media

Heavy duty stainless steel cast body with polyamide cover

Sensor built into the discharge spout automatically shuts off the supply once fluid level in the tank reaches that of the outlet discharge spout

Built-In stainless steel swivel for ease of use

WETTED COMPONENTS

SS 304, N41

RECOMMENDED USE

Water based media, Urea, Adblue, E85 and DEF

ORDERING INFORMATION

Special application pump designed to be used with a wide variety of media that cannot be pumped using a regular cast iron or steel pump

Body made from glass filled polypropylene with ryton vanes

Viton rubber seal and stainless steel hardware

Complete with 3 pc threaded suction tube suitable for use on 50-210 litre drums

WETTED COMPONENTS

Polypropylene, Ryton, Viton and Stainless Steel

RECOMMENDED USE

Water based media, acids, chemicals, detergents, benzene, glycerine etc.

DO NOT USE WITH

Acetone, Lacquer, Mineral Oils, Solvents, Turpentine etc 

ORDERING INFORMATION

Superior quality stainless steel hand operated rotary drum pump

Choice of construction materials: Stainless steel body with stainless steel bung and suction tube

Rotor with PTFE vanes and seals makes it resistant to corrosion and useful for transferring a wide Variety of fluids such as water based media, chemicals, all petroleum products etc.

Superior machining of vanes ensures better draw and smooth delivery

Fits 50 to 205 litres (15 to 55 gallon drums)

Comes complete with

1.  Pump Body
2.  2" Bung Adaptor
3.  Handle
4.  Discharge Spout
5.  3 pc Suction tube 

WETTED COMPONENTS

Stainless Steel 304, PTFE

RECOMMENDED USE

Water based media, antifreeze, acids, chemicals, all petroleum based products, lacquer, thinner, urea, adblue, DEF

DO NOT USE WITH

Hydrochloric acid, Sulphuric acid etc.

ORDERING INFORMATION

Lever action barrel pump designed for use with high viscosity oils, thick fluids, agricultural chemicals etc.

Easy and comfortable operation

Built in 2" bung adaptor allows pump to be fixed directly on drums with 2" opening

Pump position can be adjusted using the lock nut incorporated in the pump body

Air vent cap fitted in the outlet helps break siphon action

Complete with suction tube for use on 50-210 litre drums and 3/4"x2m flexible corrugated hose 

WETTED COMPONENTS

Polyacetal, Polypropylene, Polyethylene, PVC and Viton

RECOMMENDED USE

Water-based media, Detergents, Soaps, Antifreeze, Windshield washer, Hydraulic oils, Lubricants, Herbicides and Pesticides, Adblue, Urea, DEF etc. Pump should only be used with Nonflammable liquids

DO NOT USE WITH

Any media that is not compatible with the materials used in the pump construction

WARNING

These pumps must never be used for fuel transfer or with thinners, solvents, hydraulic oils etc. 

ORDERING INFORMATION

Easy to use, polyethylene pumps siphon liquids to lower levels than the height at which the pump is installed

These are easy to prime and start within 6-7 strokes

Pump requires no further operation and keeps working in auto position

All pumps are equipped with a vent cap on top. Opening the cap stops discharge

To dispense media at levels higher than the pump, pump below needs to be continuously operated

Supplied complete with flexible corrugated discharge tube  

WETTED COMPONENTS

Polyacetal, Polypropylene, Polyethylene, PVC and Viton

RECOMMENDED USE

Water-based fluids, detergents, waxes, soaps, antifreeze, some mild acids, and other liquids compatible with pump construction materials Pump should only be used with light weight and non-flammable liquids

DO NOT USE WITH

Any media not compatible with materials used in the pump construction

WARNING

• Pumps must never be used with hot media at temperatures above 60°C (140°F)
• These pumps must never be used with concentrated acids, Acetone, Benzene etc.

ORDERING INFORMATION